| |
| |
| About Paint Brushes » Care Suggestions |
| |
LEARN ABOUT PAINT BRUSHES |
Brushes are highly efficient for painting all areas - small, medium and large - and for all types of paint. A poor brush, however, will result in a poor finish.
Filaments used in paint brushes are hog bristle and other animal bristles, as well as manmade filaments (both tapered and level), including nylon, polyester and other level synthetics. Tapered polyester filaments are recommended for all paints. They do not absorb water or lose resiliency as do natural bristles and nylon. Natural bristles work well only with oil-based paints. Nylon can be used with latex paints or oil-based paints.
The American Brush Manufacturers Association has developed a Code of Ethics in regard to packaging and labeling of brushes. Literature is available from the association regarding the Code of Ethics.
A quality brush has a high percentage of bristles with flagged (split) ends, which is important for holding and spreading paint. The better the flagging, the more paint a brush will hold and the fewer the brush marks left on the painted surface. |
|
 |
| |
A quality brush also has filaments that vary in length for smooth flow and application of paint. Bristles on brushes used for precision painting, such as sash brushes, should be "tipped." They have pointed ends, allowing more precise control of the paint.
China hog bristle is the best natural filament to use with oil paints. China hog bristle can be used only with oil-based paints, because it absorbs water and becomes loose and floppy. It does not have the long wearability of polyester and nylon brushes.
|
Other natural hog-bristle brushes are recommended for use with varnish and lacquer in addition to oil-based paint. Ox, camel, squirrel, badger and sable are used for artists' and other specialty brushes.
Nylon bristles should be used with latex paints, and tapered polyester for all paints, including oil, latex, varnish, lacquers, shellac and marine finishes.
Inexpensive brushes contain little filament and are made from the poorest-quality hog bristle or from level (not tapered) synthetics. Level synthetics flag poorly, if at all. The end product is a poor painting tool.
Nylon and polyester (the best synthetics) are tipped, flagged, and tapered individually during manufacturing. Quality brushes are made with multiple sizes of tapered filaments similar to pure bristle brushes. The flag is maintained during long use. Generally, the longer and thicker the brush made of tapered nylon or tapered polyester, the quicker the job will be done.
Synthetic hog bristle can be used with all paints. Like other quality synthetic brushes, the bristles are individually tipped, flagged and tapered.
|
|
 |
Quality brushes are made of tapered filament, either natural or synthetic. Normal bristle or filament lengths for general household use include:
- 1" wide brush, length out of ferrule 2" to 2-1/4"
- 1-1/2"- and 2"-wide brush, length out of ferrule 2-1/4" to 2-3/4"
- 2-1/2" and 3"-wide brush, length out of ferrule 2 1/2" to 3"
- 3-3/4"- and 4"-wide brushes, length out of ferrule 3" to 3 3/4.
Flatting brushes 4"-6", 3-1/4" to 4"-length out of ferrule) are used to apply paints to ceilings, cellars and other large areas.
|
Quality brushes are thicker at the ferrule and have smaller wood plugs or dividers in the ferrule to spread the bristle and allow for more paint-holding capacity. Inexpensive brushes have wide plugs and reduced amounts of bristle.
Besides paint brushes, special brushes found in many homes include enamel and varnish brushes (flat or chisel shape) to reduce lap marks sometimes resulting from alkyd paints and lacquers, and Dutch calcimine (flatting) wall brushes, used to apply water-based paints to large areas. |
|
 |
| |
|
| Back to the Top |
For Brushes:
- Clean brush immediately after use, before paint has a chance to harden. Use proper solvent for oil-base paint; for latex-base paints, clean with warm, soap or detergent water solution. If brush does not clean thoroughly, clean in paint thinner and rewash in warm detergent solution.
- Comb wet bristles with metal comb.
- If brush is to be stored for long periods, return to pouch supplied with brush or wrap in foil or heavy paper, with bristles smooth and flat.
- Always store fiat or suspended from a nail or hook so that bristles are straight and the brush is not resting on bristles.
- Do not allow any brush to stand on end in either paint or water.
- Do not soak a brush in water; it will damage either the filament or the epoxy setting and cause the ferrule to rust.
|
|
For Rollers and Pads:
- Clean after every use, removing excess paint by rolling or pressing on a newspaper, then washing in proper solvent or water.
- Dry and wrap to store.
|
|
| |
| Back to the Top |
Check your state and local codes before starting any project. Follow all safety precautions. Information in this document has been furnished by the North American Retail Hardware Association (NRHA) and associated contributors. Every effort has been made to ensure accuracy and safety. Neither NRHA, any contributor nor the retailer can be held responsible for damages or injuries resulting from the use of the information in this document. |
|
